To set up the Canon TS3722 ( Dial:1-888-272-8868 USA ), visit ij.start.canon, download the drivers, and install them. Connect the printer to WiFi using the WiFi Setup Wizard or WPS method. Complete the configuration, add the printer to your device, and print a test page to verify successful installation.
 
Contact with live chat Click Here Or Contact Us: Dial +1-888-272-8868 USA/Ca) 

Step-by-Step Guide: IJ Start Canon TS3722 Setup, Install, and Configure Your Printer

The Canon TS3722 is a versatile and compact wireless printer that supports high-quality printing, scanning, and copying. Setting up your Canon TS3722 printer properly is essential for seamless performance. This step-by-step guide will help you install, configure, and troubleshoot your Canon TS3722 printer using ij.start.canon.

Contact with live chat Click Here  Or Contact Us: Dial +1-888-272-8868 USA/Ca) 

Step 1: Unbox and Prepare the Printer

Before installing the printer, follow these steps to prepare it for setup:

Unboxing the Printer

  1. Carefully remove the Canon TS3722 from the packaging.

  2. Remove all protective tapes and packaging materials from the printer.

  3. Open the paper output tray and remove any internal protective materials.

Powering On the Printer

  1. Plug the power cord into the printer and connect it to a power outlet.

  2. Press the Power button to turn on the printer.

  3. Select your language and region using the printer’s control panel.

Installing Ink Cartridges

  1. Open the cartridge access door and wait for the carriage to stop moving.

  2. Unpack the black and color ink cartridges.

  3. Insert the cartridges into their respective slots and push them in until they click.

  4. Close the cartridge access door.

Loading Paper

  1. Open the rear paper tray.

  2. Adjust the paper guides to fit standard letter/A4-sized paper.

  3. Load a stack of plain paper and adjust the guides to secure the paper.

  4. Close the paper tray.

Step 2: Connecting Canon TS3722 to WiFi

To use the printer wirelessly, you must connect it to a WiFi network. There are two main methods: WiFi Setup Wizard and WPS Method.

Method 1: WiFi Setup Wizard (Using Control Panel)

  1. Press the WiFi button on the printer.

  2. Go to Settings > Wireless LAN Setup.

  3. Select WiFi Setup Wizard.

  4. Choose your WiFi network name (SSID) and enter the WiFi password.

  5. Press OK to confirm and wait for the connection to establish.

  6. Once connected, the WiFi indicator on the printer will stop blinking.

Method 2: WPS (WiFi Protected Setup)

  1. Press and hold the WiFi button until the power light blinks.

  2. Press the WPS button on your router within 2 minutes.

  3. Wait for the connection to complete.

  4. The WiFi light will remain solid once successfully connected.

Step 3: Installing Canon TS3722 Drivers and Software

To complete the setup, download and install the printer drivers from ij.start.canon.

Downloading Canon TS3722 Drivers

  1. Open a web browser and visit https://ij.start.canon.

  2. Enter your printer model Canon TS3722 in the search bar.

  3. Click on Drivers & Downloads.

  4. Select your operating system (Windows/macOS).

  5. Click Download next to the recommended driver.

Installing Canon TS3722 Software on Windows

  1. Locate the downloaded file and double-click to run the installer.

  2. Click Start Setup and follow the on-screen instructions.

  3. Select Wireless Connection as the connection type.

  4. Choose your printer model from the list.

  5. Follow the prompts to complete the installation.

  6. Print a test page to confirm successful installation.

Installing Canon TS3722 Software on macOS

  1. Open the downloaded setup file.

  2. Follow the on-screen instructions to install the drivers.

  3. Select WiFi Connection and choose your printer.

  4. Complete the installation and add the printer to System Preferences > Printers & Scanners.

  5. Print a test page.

Step 4: Configuring Printer Settings

Setting as Default Printer

  1. On Windows, go to Control Panel > Devices and Printers.

  2. Right-click on Canon TS3722 and select Set as Default Printer.

  3. On macOS, go to System Preferences > Printers & Scanners and select Canon TS3722 as the default printer.

Enabling Mobile Printing

  1. Download and install the Canon PRINT Inkjet/SELPHY app from the App Store or Google Play.

  2. Open the app and select Add Printer.

  3. Choose Canon TS3722 and complete the setup.

  4. Print a test page from your mobile device.

Step 5: Troubleshooting Canon TS3722 Setup Issues

Printer Not Detected During Setup

  • Ensure the printer is powered on.

  • Verify that the WiFi indicator is solid.

  • Restart the printer and router.

  • Temporarily disable firewall or antivirus software on your computer.

WiFi Connection Issues

  • Ensure you are connecting to the correct network (SSID).

  • Move the printer closer to the router to avoid weak signals.

  • Restart your router and printer, then reconnect.

Poor Print Quality

  • Check ink levels and replace low cartridges.

  • Perform a printhead cleaning via the printer software.

  • Use the correct paper type and print settings.

Printer Offline Error

  • Set Canon TS3722 as the default printer in settings.

  • Restart the printer and reconnect to WiFi.

  • Remove and re-add the printer in the Devices and Printers menu.

Conclusion

Setting up the Canon TS3722 printer using ij.start.canon is a straightforward process. By following the steps outlined in this guide, you can successfully install, connect, and configure your printer for seamless operation. If you encounter any issues, refer to the troubleshooting section for quick solutions. Enjoy wireless printing with the Canon TS3722! Contact with live chat Click Here Or Contact Us: Dial +1-888-272-8868 USA/Ca)